Tuesday 31 March 2020

Information On Wood Floor Refinishing

Refinishing or refurbishing a wood floor takes time, care and patience and isn't a job that should be dismissed. Nevertheless, with the perfect preparation, the right equipment and a little bit of work, the end results could be quite outstanding. There are basically three steps to decorate your hardwood flooring. The first is sanding, the second is staining (should you choose to stain the wood floors ) and the third is hardwood flooring completing .

If it comes to sanding, there are two chief types of sander you may hire. The first is really a drum sander and the second is an orbital sander. Drum sanders have the advantage of being really successful, but are heavy and can be tricky to use. What is more, if you do not keep your drum sander constantly on the move, you will find you develop permanent grooves which are dug to the surface of your ground from the breaker turning in a stationary position. Orbital sanders on the other hand are much more user-friendly and present less risk of potential damage. Depending upon the job you're doing, you might also consider hiring an edging sander, which will let you get right into the corners and right around the skirting in your room.

If it comes to choosing the ideal sandpaper, it is a good idea to decide on a range from thick, for example 40 grit, through to fine, which extends as large as 120 grit.

Here are our Best tips for sanding your floor:

1. Sanding may be a messy process, so make sure you eliminate all the furniture and soft furnishings and clear the space completely. When removing furniture, just take care not to haul heavy items across the floor because this can lead to damage.

2. If your area is empty, you will have a fantastic opportunity to be certain that the floor is clear of any staples, nails or tacks that could cause problems while you're sanding. Should you find principles, be certain that you pull them out and have some opportunity to punch any screws or nails down so they fall beneath the top layer of the wood.

3. When you begin to sand, use the heaviest grit in the start and re-do the ground, working with finer grit each time (the same rule also applies to the edges if you are using an edging sander).

As soon as you've finished sanding, make sure you vacuum up all of the dust that has accumulated on the ground and between any openings in the floor. At this stage it's important to leave enough time between sanding and staining and finishing to ensure any airborne dust has settled and has been cleared off before moving on to another stage.